The VEC400/402HC offers users a high performance colour camera, packed with a host of features not usually found on this style of camera.

The consistently high quality images captured by the cameras are complimented by the simple to navigate on-screen display, not only making installation quick and simple but also reducing service times.

Features include four privacy zones which can be used to blank sections of the image such as ATM card machines. The Dynamic Noise Reduction (DNR) provides cleaner images under low or difficult lighting conditions and also improves recording time on modern DVRs. Video Motion Detection (VMD) alerts operators to activity within predefined areas.

Key Features:

Privacy zones
Four user configurable privacy zones enable users to blank up to four separate areas on screen – ideal of blanking chip and pin machines

Dynamic Noise Reduction
DNR automatically cleans the video signal to provide a better picture, especially useful under difficult lighting conditions. This cleaner image also saves hard disk space on modern DVRs

Frame integration via sens-up feature
This allows the camera to be far more sensitive in low light conditions by effectively comparing consecutive images, user-configurable from x2-x128

On-Screen Display
The OSD provides a simple easy to navigate set-up facility for all the camera’s features

Video Motion Detection
Four user-configurable areas will provide on-screen notification of motion in any of the predefined areas

General
Sensor 1/3” SuperHAD (Sony CCD)
Total Number of pixels 795(H)x596(V)
Resolution 540TVL
Video Output 1.0 Vp-p, 75ohms
Sensitivity 0.3 Lux
Signal to Noise Ratio 50dB (AGC Off)
Electronic Shutter 1/50~1/120,000 sec
Synchronisation Line Lock/Internal
Function
Auto Exposure A Auto/Manual Shutter/Flicker less/AGC
White balance AT AT ATW/AWB Manual
Lens M Manual/DC/Video
AGC On/Off/Normal/High
Shutter Speed 1/50~1/50,000 sec
BLC Off/Low/Middle/High
Sens -up Off/Auto (x2~x128)
Sharpness On/Off (0~3)
Privacy Zone On (4 point)/Off
Display Display mode Selection (On/Off)
DNR Off/Low/Middle/High
Mirror On/Off
Motion Detection On (4 point)/Off
Preset Default/Save/End
Connections
Video Out put BNC
Power Input Wired Power Cord (Mains) 2-Pin Terminal block (LV)
Auto Iris output 4-Pin mini din jack (standard)
Lens mount C/CS mount (Selected through back focus)
Mounting hole 1/4” – 20 UNC (Top/ bottom)
Physical
Dimensions
Net 120x66x56mm (LxWxH)
Weight 250g
Material
Colour S Silver
Electrical
Power Supply 100-240V~50Hz, 12V DC/24V AC ± 10%
Power Consumption 4.5W (Mains) 4.0W (LV)
Environmental
Operating Temperature -10°C~+50°C