ELECTRIC OPERATED STEEL ROLLING SHUTTERS

We offer our traditional range of steel rolling shutter to suit all applications with manual and electrical operation.

Our electric steel rolling shutter is manufactured to the same high standard as our hand chain operated rolling shutter and is available for openings up to 9000mm wide x 9000mm high. (Larger openings can be accommodated)

Operation

Standard operation is by a 3 Phase & Neutral motor with low level push button control.

Single-phase operation is available but is not recommended for doors that receive frequent use

Options available

• Wiring between motor and isolator/spurPerforated lath
• Punched lath
• 75mm Flat faced lath (not available perforated)
• Galvanized sheet steel hoods, fascias, soffits & motor cover
• Personnel wicket gates (gates for wheelchair use also available)
• Nylon brush lintel and guide seals
• Rubber bottom rail seal
• Wind Endlock guides

Control options

• Induction Loop
• Radio Control
• Radar (Motion Sensor)
• Card Reader
• Timed automatic closing
• Part open facility (suitable for tall doors when full height opening is infrequently required)
• Flameproof motors and controls

Safety Options available

• Photo Cell safety beam
• Safety Edge