| |
The Therma-roll Insulated shutter range has a choice of 3 profile sizes 42mm, 52mm and 77mm. All of the Therma-roll profiles are Aluminium double skin profiles, with cfc free insulated core sections, designed to give acoustic and thermal benefits. Therma-roll also has a choice of operating systems and control options to match all requirements
Therma-roll 42mm profile
42mm profile sections are designed to interlock to give maximum insulation and acoustic properties, with a thickness of 5mm across the profile the Therma-roll 42mm is ideally suited for domestic and cabinet applications. Small profiles have improved rolling characteristics allowing smaller head space requirement, the 42mm profile only requires as little as 150mm housing box. Every Therma-roll shutter comes complete with reinforced bottom rail section giving added security when closed. When using a manual counterbalance operating system the locking section will be incorporated in a specially designed extruded base rail which has recessed locking bars giving added security.. |
 |
All Therma-roll shutters are supplied with a full housing casing as standard. A choice of shape is also available, with the conventional angular head plate or the curved head plate and housing box. In conjunction with curved guide cover this can make any application more aesthetically pleasing
Dome face guide caps are also available serving a dual role of covering any fixing points, giving added security as well as giving the guide section a more aesthetically pleasing finish when used in a face fix enviroment |
|
| |
| Therma-roll 43 has a choice of guide sections to suit most applications. All guide sections come complete with brush strips. |
 |
 |
| All of the above height calculations are based upon a 60mm octagonal axle. If exceeding a span of 3000mm please allow for a 70mm axle which may alter the headplate size Please call to verify your plate details prior to ordering. |
| |
 |
. |
Operating Systems
Therma-roll is available with a choice of operating systems to suit all application requirments |
| |
| Electric operation. Using Somfy tubular motors Therma-roll can be power driven with ease, with the choice of manual over-ride options for doorway shutters and non over-ride options for window shutters. A range of Somfy motors utilising electronic limits are available to match all applications where hard wiring visibility is an issue. |
 |
| |
|
| Manual Counterbalance Operation. Utilising specially designed spring systems to compensate the weight of the Therma-roll profiles, manual operation is made light and easy. All manual shutters are supplied with a base rail security lock system |
 |
| |
|
| Gearbox Operation. When manual operation is required from the internal elevation of the building a gearbox system can offer a perfect solution, allowing the shutter to be raised using a crank handle |
 |
| |
|
| Auto locking System can be used with motorised and gearbox operated shutters to enhance security |
 |
| |
|
| Tape winder box operation is available on the Therma-roll 40mm and 52mm profile shutters. Allowing easy operation from the internal elevation of the building |
| |
|
Control Options
In conjunction with powered operation a selection of control options are available.
- Keyswitch- Externally mounted security switch supplied with two keys, flush fitting or surface options
- Standard Dial Switch- Internally mounted wall switch controlling a single shutter, flush fitting or surface mounted
- Wireless Remote Systems- Allowing the control of groups of window shutters via one remote switch.
- Remote Control Systems- Used in conjunction with a safety device the remote system can be used on any application.
- Specialist Group Controls- Specialist control systems to manage a full building can be designed to allow shutters covering fire exits to be opened on activation of a fire alarm system. Individual room controls including light integration systems can also be catered for
|
   |
| |
|
Application styles
Therma-roll can be supplied in a range of application styles .
In-Built System |
 |
| |
|
In Built system allows the shutter box to be hidden completely when viewed from the building exterior.
- The head box is a upvc section with a removable
internal access panel see Fig 3.
- Designed for use with new build, the system can also be integrated when refurbishing window profiles.
- Recessing the internal block work to accommodate the guide section allows the guide to be flush with the outside face of the finished brickwork see Fig 2.
- Using a standard step lintel to create the space required to hide the head plate system above the external finished brick line.
- The shutter can either be fitted directly to the window system off site, or fitted directly to the wall before the window is installed.
- The window section requires an additional spacer attached to each side to ensure that the glass line does not interfere with the finished external brickwork.
Standard Face Fix |
 |
Standard Face fix is used for most retro-fit applications, using standard head plates and full box cover, this system sits directly onto standard layout brickwork with the box surface mounted above the window opening.
When using face fix with certain applications a base cill angle may be required when the existing window cill is not suitable for the shutter to close onto.
Standard Reveal Fix |
 |
| Standard Reveal Fix allows the shutter to fit between two parallel surfaces. All shutters have a full box which includes a back box ( Fascia) that hides the barrel mechanism. On wider spans where the fascia is unsupported we advise the use of a stiffening angle to help ensure the fascia stays rigid. The over-ride or gearbox outlet can be positioned to either exit from the front of the plate or the back, allowing operation from inside or outside. This application is commonly used for recessed doorways and cabinet applications |
